Apacer SSD PPSS25 Series - 2TB AP2TPPSS25A (SATA3, Olvasás: 560 MB/s, Írás: 510 MB/s)
Ez a termék nem elérhető a webáruházunkban!
| Specifications Overview: Compliance with SATA Revision 3.2 – SATA 6 Gb/s interface – Backward compatible with SATA 1.5/3 Gb/s interfaces Capacity – 2 TB Performance – Burst read/write: 600 MB/sec – Sequential read: Up to 560 MB/sec – Sequential write: Up to 510 MB/sec – Random read (4K): Up to 48,000 IOPS – Random write (4K): Up to 66,000 IOPS Flash Management – Low-Density Parity-Check (LDPC) Code – Global Wear Leveling – Flash bad-block management – S.M.A.R.T. – ATA Secure Erase – TRIM NAND Flash Type: 3D TLC MTBF: >2,000,000 hours Endurance (in Terabytes Written: TBW) – 2 TB: 3,465 TBW Temperature Range – Operating: 0°C to 70°C – Storage: -40°C to 70°C Supply Voltage – 5V ± 5% Power Consumption – Active mode (Max.): 2,200 mW – Idle mode: 1,800 mW Connector Type – 7-pin SATA signal connector – 15-pin SATA power connector Form Factor – 2.5” – Dimensions: 100.00 x 69.85 x 7.00, unit: mm RoHS Compliant Warranty: 3 years or TBW (whichever occurs first) Metallic Housing |